If you want your sprinkler heads to function properly, it’s important that you find good quality irrigation pumps in Yelm, WA. And before you invest in those irrigation pumps, it’s helpful to know more about them so you can make an informed buying decision. Below, we explain the four types of irrigation pumps—surface centrifugal, submersible, turbine and propeller—and their pros and cons.
Surface centrifugal
This is the most common of the four types of irrigation pumps in Yelm, WA. Surface centrifugals are installed above, rather than below, the water level, and are then filled with water in order to function. Since these pumps must draw water from a reserve in order to run, they are a good choice for those with access to lakes or reservoirs.
Their energy output is also quite low. These pumps are well liked because they are simple to install, very economical and can be used in a variety of different ways. A word of caution: while they do function smoothly, these pumps can easily become damaged if they lose their prime.
Submersible pumps
Submersible pumps are installed the opposite way from surface centrifugals: that is, underwater, rather than above the water line. Every part of the pump is underwater, even the motor. Submersible pumps are popular for their efficiency and versatility, particularly in low-pressure water situations. They also have the added bonus of being more self-sufficient than centrifugal pumps, as they do not need to be primed prior to use.
It is important to consider, however, that submersible pumps require electricity to function, and they are more likely to be struck by lightning.
Turbine or jet pumps
Turbine/jet pumps are made up of both submersible and surface pumps: their motor stays above water, on the surface, while their pump is submerged underwater. If you are in a situation where your water supply or depth fluctuates frequently, a turbine or jet pump might be the answer, because it can use suction to pull water upward. Additionally, it performs admirably well, even in low-pressure environments and in wells.
Those who value peace and quiet will find the turbine/jet pumps pleasantly quiet. The downside of these high-functioning pumps is that they are less economical than some other options and can also be more challenging to repair if they break. If you invest in these pumps, make sure to get the impeller adjusted periodically, as this will help it to maintain its high efficiency.
Propeller pumps
These pumps have a high capacity, although they do not provide high pressure. They are frequently utilized for areas that require a high flow rate. The pump is generally placed close to the water supply’s surface. Like submersibles, propeller pumps do not need to be prime, and they are also easy to install. However, they do not have the capacity to suction water upward, and they only generate low energy output.